|
Name: eneteentumn
E-mail: verasols@mail.ru
Date Posted: 19:39, 21 11 2008
Message: to: Admin - If You want to delete your site from my spam list, please visit this site for instructions: remove-url.co.cc
Name: ZefwhornWeene
E-mail: kermade@mail.ru
Date Posted: 13:57, 21 11 2008
Message: to: Admin - If You want to delete your site from my spam list, please visit this site for instructions: stopspamtoday.007sites.com
Name: Sean O'Connell
E-mail: seanoconnellmail@yahoo.com
Date Posted: 07:47, 20 04 2008
Message: Installing a 07 GSXR 1000 GDR prepped in a RF96 Van Diemen FB conversion. George tuned with a Powercommander, installed a custom wet-sump pan, manual cam tensioner, did the harness, plus set it up with the stock dash so it would work as well. 
Name: Joshua Held
E-mail: joshuaheld@yahoo.com
Date Posted: 15:46, 24 03 2008
Message: During the 07' season I ran a total of 9 races (including the Runoffs) with a fully built 06' GSXR 1000 engine. During this season George's engine propelled me to 6 wins in 8 starts and 4th place at the 07' runoffs - WITH NO DNFs. Incredible reliability given the power levels we had.
If you’re looking for an engine builder you will find no one friendlier and dedicated then George! He's your man for high powered bike engines.
Josh Held #81 DSR
Name: Jeff Brauch
E-mail: tripledigits@aol.com
Date Posted: 18:42, 27 12 2007
Message: George built my 2002 GSXR 1000, as well as modifying the wiring harness. The engine runs well, and my son has a solo national championship as a result...
George has always been helpful in answering my (often stupid) questions, exhibiting more patience than I could hope for.
Thanks George!
Name: Jay Hardy
E-mail: jayhardy007@hotmail.com
Date Posted: 01:01, 22 12 2007
Message: I just purchased Fabian Okonski's GDRE built R-1 with FCR's. This engine is a full season old, (rebuild) with no mechanical issues. I just completed a tear down for a look see and refresh. Amazing clearances for a old engine. Still passes a leakdown! I'm on the low buck side, but very familiar with building race bike power plants. I'm thinking of just having you freshen it up once again.
Good work...Jay
Name: Pete Fowler
E-mail: nasaracer@cox.net
Date Posted: 22:26, 17 12 2007
Message: George helped me with a Radical Powertec motor that he installed a dry sump system and carbs on, then convinced me to do it the way I should have in the first place with a stock motor with fuel injection. Always helped me on the phone when I had questions and has been nothing but helpful even though I'm not a "big" customer. Text book example of how to run a business and one of only a couple of people in the country that I'd trust to build a motor for me.
Name: Matt Conrad
E-mail: matt@phoenixracecars.com
Date Posted: 13:16, 17 12 2007
Message: George prepared the GSX-R1000 for the Phoenix Race Works, LLC F1000 Prototype (Stock engine with a billet clutch basket) and prepares all of the wiring harnesses and engines for our turn-key production F1000 cars as well. George has also built many custom engines for our DSR and CSR customers over the last few years. If you need a powerplant for your motorcycle-powered car...George is your man!
Name: BILL LOMENICK
E-mail: BLOMENICK@DELTATAU.COM
Date Posted: 13:02, 17 12 2007
Message: 2 wiring harnesses for 05/06 GSXR
Name: Jay Messenger
E-mail: jay@messengerracing.com
Date Posted: 12:22, 17 12 2007
Message: 07 GSX-r 1000 and wiring harness for DSR
Name: larry svaton
E-mail: larrysvaton@hotmail.com
Date Posted: 21:49, 16 12 2007
Message: wire harness for busa in fall 2006
Name: Jason Somers
E-mail: Jaysom@aol.com
Date Posted: 20:18, 16 12 2007
Message: 2004 GSXR 1000 - GDRE Preped
Yosh Harness and ECU
Name: Jason Somers
E-mail: Jaysom@aol.com
Date Posted: 20:16, 16 12 2007
Message: 2004 GSXR 1000
Yosh Harness and ECU
Name: David Arken
E-mail: arkend@sbcglobal.net
Date Posted: 17:05, 16 12 2007
Message: Engine - 2005 Kawasaki ZX10R, also lots of help on various engine and wiring harness issues.
Thanks George,
David Arken
Name: Dick Boggs
E-mail: bdboggs@aol.com
Date Posted: 15:06, 16 12 2007
Message: In the 1999 Amac sold to Mr. Farr 03-04
In the 2005 Amac sold to F.R 05-06
Did both wiring harnesses although Jay did some of his wiring harness on the 2005 Amac
Name: Juan Montalvo
E-mail: jmgfc@earthlink.net
Date Posted: 14:38, 16 12 2007
Message: 04 GSXR & wiring in my Phoenix. Good reliable power.
Name: John Howarth
E-mail: racerh@msn.com
Date Posted: 09:47, 16 12 2007
Message: O4 Suzuki and Wiring Harness done by George in my Phoenix
2006, 13 weekends, One National win, SFR regional Champ, and a Track Record at Laguna on the 13th weekend. The motor never came out of the car all year.
George took it apart, after the season looked at it put in some rings and bearings in, just because, and put it back together. It is still in the car.
Thanks George,
John
Name: Bob Gardner
E-mail:
Date Posted: 09:19, 16 12 2007
Message: I have an '04 Yamana R1 with dry sump, done by GRD, in my Stohr WF-1 DSR, and I continue to search for the best way to use all the power.
Name: Marty Bose
E-mail: martyb@sonic.net
Date Posted: 09:04, 16 12 2007
Message: We at GonMad Racing started out with an '06 GSXR in our Stohr F1000, and it survived a number of fubar's on our part, particularly being overheated on a regular basis until we figured out our plumbing problem. We are looking forward to taking delivery on our '07 GDRE GSXR.
Name: Wayne Briggs
E-mail: wayno1391@yahoo.com
Date Posted: 08:54, 16 12 2007
Message: I have a George built wire harness on my '04 GSXR.
Name: Craig stafford
E-mail: ccstaf@windstream.net
Date Posted: 06:17, 16 12 2007
Message: I ran an '01 Yamaha R1 built by George in Stohr chassis # 03 before I sold both to George Smith of Alpharetta ,Ga. The motor was solid and dependable with very good low end torque.If I decide to race a MC motored car again, George will be my engine builder . He's the Man.
Name: Craig Farr
E-mail: farrout@knology.net
Date Posted: 05:40, 16 12 2007
Message: I will be running the 03-04 GSXR 1000 that is Dick Boggs AMAC.
Name: Fabian Okonski
E-mail: foko@comcast.net
Date Posted: 00:26, 16 12 2007
Message: I have run 99-01 Yamaha R1's since 2005. Two complete motors built by George, as well as subsequent rebuilds.
Starting in 2008, I will run 07 Suzuki GSXR, also built by George.
I second the thumbs up on the support....George is the man!! Thanks
Name: Ken Tandy
E-mail: ken@vehdyn.com
Date Posted: 21:02, 06 12 2007
Message: I am running a 2006 GSXR along with a wiring harness built by George for my 2007 Stohr FB. The engine runs like a champ and the support has been fantastic. George will be my only source for engine support in the future. Thanks.
Name: Sean Maisey
E-mail: smaisey@cwf.org
Date Posted: 22:32, 26 11 2007
Message: I am running a 2006 GSXR by George. He also built my wiring harness. I am extremely satisfied with both. No one supports their customers as well...
FB #99
Name: Chris Farrell
E-mail: cm@teamcobra.com
Date Posted: 17:31, 26 11 2007
Message: George built me a 06 GSXR for my Stohr WF1 ( its fast !!! ), along with a wiring harness and prepped a stock 06 GSXR for me as well
Name: Bill Maisey
E-mail: billmaisey at cox.net
Date Posted: 12:29, 20 11 2007
Message: I have a George built '04 GSXR and a simplified wiring harness.
|